Juniper Networks M10i Network Router User Manual


 
Table 2: Adaptive Services PICs Software Features (continued)
6.4Network Address Translation (NAT) for IP addresses
6.4Port Address Translation (PAT) for port numbers
6.4IP Security (IPSec) encryption
6.4Active flow monitoring exports cflowd version 5 and version 8
records
8.3Active flow monitoring exports version 9 records, based on
RFC 3954 (IP v4 templates only)
Passive flow monitoring
Passive flow collection
8.1Flow-tap
Dynamic flow capture
8.3Real-time performance monitoring
7.3Link services
6.4Tunnel services:
IP-IP unicast tunneling
GRE unicast tunnelingSupports GRE fragmentation
Protocol Independent Multicast (PIM) sparse mode unicast
tunneling
6.4Virtual tunnel interface for Layer 3 VPNs
6.4Layer 2 Tunneling Protocol (L2TP)
7.3Voice services:
Compressed Real-Time Transport Protocol (CRTP)
7.1Encapsulations:
Multilink Frame Relay (MLFR)
Multilink Point-to-Point Protocol (MLPP)
6 Adaptive Services II PIC
M10i Internet Router PIC Guide