Juniper Networks M10i Network Router User Manual


 
MultiServices 100 PIC
JUNOS 8.1 and laterSoftware release
Supports tunnel services. This feature is included with the PIC and does not require an
individual license.
Individual licenses must be purchased for additional services.
Power requirement: 0.52 A @ 48 V (25 W)
Description
Active monitoring on up to 1.6 million flowsHardware features
Support for up to 2000 service sets
Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces
Depending on your JUNOS release and individual licenses, software features for this PIC can
include the features listed in Table 12 on page 55. For more information about the software
features available for services PICs, see the JUNOS Services Interfaces Configuration Guide.
Software features
Status LED, one tricolor:
OffPIC is offline and it is safe to remove it from the chassis.
GreenPIC is operating normally.
AmberPIC is initializing.
RedPIC has an error or failure and no further harm can be done by removing it from
the chassis.
Application LED, one bicolor:
OffService is not running.
GreenService is running under acceptable load.
AmberService is overloaded.
LEDs
Table 12: MultiServices PICs Software Features Supported by the M10i Router
MultiServices 100Software Feature
8.1GRE Key
8.1GRE dont-fragment
MultiServices 100 PIC 55
MultiServices 100 PIC