Filter
Top Products
Link Services PIC
■
JUNOS 6.1 and laterSoftware release
■
Power requirement: 0.17 A @ 48 V (8 W)
■
Three versions:
■
4 multilink bundles, 256 LFI links
■
32 multilink bundles, 256 LFI links
■
128 multilink bundles, 256 LFI links
■
Multilink bonding, link fragmentation and interleaving (LFI), and tunneling
Description
■
Rate limiting/policing per multilink bundle
■
Byte-wise load balancing across multilink bundles
■
Bonding T1 links enable service ranging from 1.5 Mbps through 12 Mbps
■
Bonding E1 links enable service ranging from 2 Mbps through 16 Mbps
■
Loopback function that encapsulates and de-encapsulates packets
Hardware features
For a list of the software features available for services PICs, see the JUNOS Services Interfaces
Configuration Guide.
■
Protocol support:
■
Multilink PPP (MLPPP)
■
Multilink Frame Relay (MLFR)—FRF.15 and FRF.16
■
Link fragmentation and interleaving (LFI)—FRF.12
■
LFI over MLPPP
■
IP-IP unicast tunneling
■
GRE unicast tunneling
■
PIM sparse mode unicast tunneling
Software features
One bicolor:
■
Off—PIC is offline
■
Green—PIC is online and at least one configured bundle is operating
■
Amber—PIC is online, but no configured bundles are operating
LEDs
54 ■ Link Services PIC
M10i Internet Router PIC Guide