Juniper Networks M10i Network Router User Manual


 
DS3 PIC
JUNOS 6.1 and laterSoftware release
Two or four DS3 ports
Power requirement: 0.47 A @ 48 V (22.5 W)
Integrated DSU interoperability with leading DSU vendors
Description
High-performance throughput on each port at speeds up to 44.736 Mbps, full duplex
C-bit framing
B3ZS line encoding
Subrate and scrambling:
Digital Link
Kentrox
Larscom
Per-port rate policing on input
Per-port rate shaping on output
Packet buffering, Layer 2 parsing
Hardware features
DS3 functionality:
C-bit framing
B3ZS line encoding
DS3 diagnostics and loopback control
DS3 alarm and event counting and detection
Per-packet counts and byte counts
Local and remote loopback testing, as well as BERT testing per DS3
DS3 far-end alarm and control (FEAC) channel support
Encapsulations:
High-Level Data Link Control (HDLC)
Frame Relay
Circuit cross-connect (CCC)
Point-to-Point Protocol (PPP)
Software features
Custom 10-ft (3.05-m) posilock SMB to BNC male cable, separate Rx and Tx (provided)Cables and connectors
32 DS3 PIC
M10i Internet Router PIC Guide