Juniper Networks M10i Network Router User Manual


 
ATM2 DS3 IQ PIC
JUNOS 6.1 and laterSoftware release
Four DS3 ports
Power requirement: 0.41 A @ 48 V (20.0 W)
Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface.
ATM standards compliant
Description
16-MB SDRAM memory for ATM segmentation and reassembly (SAR)
ATM switch ID
Configurable framing options:
C-bit with ATM direct mapping
C-bit with Physical Layer Convergence Protocol (PLCP) framing (default)
M23 ATM direct mapping
M23 with PLCP framing
Internal and loop timing
Hardware features
Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping
Unspecified bit rate (UBR) traffic shaping
Fine-grained variable bit rate (VBR) traffic shaping
Circuit cross-connect (CCC)
ATM Inverse Address Resolution Protocol (ARP), which enables routers to automatically
learn the IP address of the router on the far end of an ATM permanent virtual circuit
(PVC)
Simple Network Management Protocol (SNMP):
Management Information Base (MIB) 2 (RFC 1213)
ATM MIB (RFC 1695)
SONET MIB
AAL5 encapsulations:
ATM-VC-MUX
ATM-NLPID
ATM-Cisco-LLPID
ATM-SNAP
ATM-CCC-VC-MUX
Software features
ATM2 DS3 IQ PIC 9
ATM2 DS3 IQ PIC