Juniper Networks M10i Network Router User Manual


 
Adaptive Services II PIC
JUNOS 6.4 and laterSoftware release
Supports tunnel services. This feature is included with the PIC and does not require an
individual license.
Individual licenses must be purchased for additional services.
Power requirement: 0.4 A @ 48 V (19 W)
Description
Support for up to 2000 service sets
Active monitoring on up to 1 million flows
Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces
Hardware features
Depending on your JUNOS release and individual licenses, software features for this PIC can
include the features listed in Table 2 on page 5. For more information about the software
features available for services PICs, see the JUNOS Services Interfaces Configuration Guide.
Software features
Status LED, one tricolor:
OffPIC is offline and it is safe to remove it from the chassis.
GreenPIC is operating normally.
AmberPIC is initializing.
RedPIC has an error or failure and no further harm can be done by removing it from
the chassis.
Application LED, one bicolor:
OffService is not running.
GreenService is running under acceptable load.
AmberService is overloaded.
LEDs
Table 2: Adaptive Services PICs Software Features
Adaptive Services II PICSoftware Feature
7.1GRE Key
7.0GRE dont-fragment
6.4Stateful firewall with packet inspection: detects SYN attacks,
ICMP and UDP floods, and ping of death attacks
Adaptive Services II PIC 5
Adaptive Services II PIC