Juniper Networks M10i Network Router User Manual


 
4-port PIC:
Connector: Two-pair, Category 5 unshielded twisted-pair connectivity through an RJ-45
connector
Pinout: MDI noncrossover
8-port PIC:
Connector: MT-RJ female
FX optical interfacesee Table 8 on page 45
12-port PIC:
Connector: One very High Density Connector Interface (VHDCI) to RJ-21 cable that
connects to an RJ-45 patch panel
Cables and connectors
Status LED, one bicolor:
OffPIC ports not enabled
GreenPIC is operating normally
RedPIC has an error or failure
4-port PICOne pair of port LEDs:
Link LEDIf green, the port is online; if there is no light, the port is down
RX LEDIf flashing green, the port is receiving data; if there is no light, the port might
be on but is not receiving data
8-port PICone pair of port LEDs per port:
Port link LEDIf green, the port is online; if there is no light, the port is down
NOTE: The Link LED remains lit on the 8-port PIC when the port is down.
Port RX LEDIf flashing green, the port is receiving data; if there is no light, the port
might be on, but is not receiving data
12-port PICone port LED per port:
Green100-Mbps link established
Flashing green100-Mbps activity
Yellow10-Mbps link established
Flashing yellow10-Mbps activity
OffNo link present
NOTE: The port LEDs remains lit on the 12-port PIC when the ports are down.
LEDs
Table 8: Optical Interface Support for Fast Ethernet PICs
FX interface for 8-PortOptical Parameters
MultimodeOptical interface
Fast Ethernet PICs 45
Fast Ethernet PICs