Juniper Networks M10i Network Router User Manual


 
Gigabit Ethernet IQ2 PIC with SFP
JUNOS 7.6R3 and laterSoftware release
Four Gigabit Ethernet ports
Power requirement: 0.65 A @ 48 V (31 W)
Description
High-performance throughput on each port: speeds up to 1 Gbps
Full-duplex mode
Large maximum transmission units (MTUs) of up to 9192 bytes
Hardware features
Intelligent handling of oversubscribed traffic
Optical diagnostics and related alarms
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
Virtual Router Redundancy Protocol (VRRP) support
Hierarchical shaping
Fine-grained queuing and shaping per logical interface at both ingress and egress
802.1q virtual LANs (VLANs)
VLAN stacking and rewriting
Channels defined by two stacked VLAN tags
Multiple tag protocol identifiers (TPID) support
IP service for nonstandard TPID and stacked VLAN tags
802.1p rewrite per channel
Flexible mapping of channels and scheduler resources at both ingress and egress
Flexible Ethernet encapsulation
MAC learning, policing, accounting, and filtering
Software features
Gigabit Ethernet IQ2 PIC with SFP 51
Gigabit Ethernet IQ2 PIC with SFP