Filter
Top Products
Inline Encoding
v
"Inline Encoding Format" (A page 118)
v
"Character Code List" (A page 119)
Inline Encoding Format
v
Inline encoding can be performed by enabling the settings in the
[Encode] tab of the printer driver settings.
"[Encode] Tab" (A page 94)
v
Encoding data can be sent to the printer through the printer driver
using the special character strings (prefixes) described below.
This function is called “inline encoding”.
v
Adding a prefix (tilde (~), ?, or numeric characters) at the beginning
of a text string enables the string to be recognized as encoding data.
Character strings including prefixes are not printed on the card when
they are recognized as encoding data.
No. Prefix (half-
width
character
string)
Text string
following prefix A
Usable
character
code list B
Max.
string
length
C
1 ~ ?0 String denotes
JIS2 magnetic
encoding data. D
7-unit code 69
2 ~ ?1 String denotes ISO
track 1 magnetic
encoding data.
6-unit code 76
3 ~ ?2 String denotes ISO
track 2 magnetic
encoding data.
4-unit code 37
4 ~ ?3 String denotes ISO
track 3 magnetic
encoding data.
4-unit code 104
5 ~ ?4 Contact IC
encoding data.
8-unit code 32760
6 ~ ?5 Non-contact IC
encoding data.
8-unit code 32760
7 ~ ?6 String denotes ISO
track 1 magnetic
encoding data.
7-unit code 69
8 ~ ?7 String denotes ISO
track 3 magnetic
encoding data.
7-unit code 69
9 ~ ?8 String denotes ISO
track 1 magnetic
encoding data
(AAMVA standard).
6-unit code 79
10 ~ ?9 String denotes ISO
track 3 magnetic
encoding data
(AAMVA standard).
6-unit code 79
A Make sure that the string is not broken, and use the same font.
B Encoding cannot be performed correctly if characters that do not
conform with the usable character code list are used.
C The maximum string length is the number of characters including
control codes and excluding prefixes.
D Half-width katakana characters can be used. For a list of usable
characters, refer to the Katakana Character Code List.
Cautions:
v
Character strings may not be recognized as encoding data if they
are processed as graphics, such as screen captures. Processing of
character strings is dependent on the application software in use.
v
Enter the inline encoding character strings in the first image of each
card to be printed.
m
Example
.
A CB
~?1DEF
ABC
DEF
ABC
A Textbox character strings of application software
B Character string to be printed on card
C Encoding data to be sent to ISO track 1
Setup
118