Filter
Top Products
4
Apply alcohol to a cotton swab (large), and use it to wipe the four
bobbin holders
(Cotton swab and alcohol: sold separately)
.
5
Insert the retransfer film cassette along the guide rail until a “click”
sound is heard
.
.
6
Insert the ink ribbon cassette along the guide rail until a “click”
sound is heard, followed by closing the printer door
.
.
Thermal Head
v
Lines may appear on the card after printing if the thermal head is
dirty.
v
Clean the thermal head after printing about 10,000 images.
Cautions:
v
If the security lock is on, deactivate it. After work is complete,
activate the security lock again.
v
Start work after ensuring that the power has been turned off.
v
Stand the cassette on a flat surface as illustrated in the diagram.
Avoid doing so on the floor as dust attached to it may cause printing
errors.
.
v
Do not perform any work on the printer door. Do not place heavy
objects or apply load on the printer. Doing so may damage it.
v
Touching the thermal head with your body electrostatically charged
may cause damage to the head. Make sure that you touch the
metallic part of the printer before commencing work.
v
Pay attention to prevent metallic objects from knocking against the
thermal head. Doing so may damage it.
v
After cleaning is complete, check to ensure that all dismantled parts
are restored to their original positions. Failure to restore the parts
may result in malfunction of the printer.
v
For details on separately sold items, please consult our authorized
dealers.
1
Open the printer door
.
2
Press and hold down the cassette button, and remove the ink ribbon
cassette (on the right)
.
Maintenance
41