JVC LST1006-002A Printer User Manual


 
m
[Portrait] Orientation
.
B
C
A
1234-5678-90AB
1234-5678-90AB
A MAC address printing position when [Upper Right] is selected
B MAC address printing position when [Lower Left] is selected
C (X=0, Y=0)
MAC
Address
Printing
Position
Starting
X
Starting
Y
Width Height
AUpper
Right
51.82 mm 64.69 mm 2.88
mm
19.47
mm
612 pixel 764 pixel 34 pixel 230
pixel
BLower
Left
1.61 mm 3.56 mm 2.88
mm
19.47
mm
19 pixel 42 pixel 34 pixel 230
pixel
v
The above printing position setting for the MAC address is always
effective regardless of the printer unit settings.
The above measurements show the relative position from the
starting point of the image. As such, the actual printing position on
the card may be slightly different from the abovementioned
measurements.
Memo:
v
The printing start position displayed on the application software may
not coincide with the X=0, Y=0 position above.
About 1 mm from the edge of the image is not printed on the card.
"The edge of the image is not printed" (A page 123)
Windows Bitmap File Format
The following Windows bitmap file formats (*.BMP) are supported.
m
Monochrome/Black & white
v
Bit(s): 1
Normally, white color is printed using the UV ink with maximum
density.
When white color is selected in [No printing color], black color is
printed using the UV ink with maximum density.
m
2 colors
v
Bit(s): 1
Prints using the UV ink with 256 gradation in accordance with the
color palette.
If any of the colors in the color palette is specified in [No printing
color], other colors that are not specified are printed using the UV ink
with maximum density.
m
16 colors
v
Bit(s): 4
Prints using the UV ink with 256 gradation in accordance with the
color palette.
m
256 colors
v
Bit(s): 8
Prints using the UV ink with 256 gradation in accordance with the
color palette.
m
32768 colors
v
Bit(s): 15
Prints using the UV ink with 256 gradation.
Only the “(MSB) GGGBBBBB-XRRRRRGG(LSB)” format is
supported.
m
24 bits
v
Bit(s): 24
Prints using the UV ink with 256 gradation.
m
32 bits
v
Bit(s): 32
Prints using the UV ink with 256 gradation.
Number of retransfer film panels during printing
Printing
Data
[Number of panels using the retransfer
film] Setting
1 Panel Auto 2 Panels
Printing
data that
overlaps
with the UV
ink data
outside the
MAC
address
printing
area
None Print in 1 panels Print in 2
panels
YMC
Ink
Print in 1
panels
* The YMC ink
is not printed
at areas
where it
overlaps with
the UV ink.
Print in 2 panels
K
Ink
Print in 1
panels
* The UV ink
is not printed
at areas
where it
overlaps with
the K ink.
Print in 2 panels
Printing
data inside
the MAC
address
area
None Print in 1 panels Print in 2
panels
YMC
Ink
Print in 1
panels
* Does not
print using the
YMCK ink.
Print in 2 panels
K
Ink
Print in 2 panels
UV
Ink
Prints the MAC address only
The target printing data is compared in units of pixels to determine
whether there is any overlap.
Priority is given to the “Print in 2 panels” setting.
Setup
93