8 www.kodak.com/go/support
2 Preparing your EasyShare
digital camera
Choosing the right camera battery
IMPORTANT:
The printer dock is intended to charge only the Kodak EasyShare
Ni-MH rechargeable battery pack (included) and the Kodak
EasyShare Li-Ion rechargeable battery (included with some
cameras). Batteries made by manufacturers other than Kodak are
not supported. Damage caused by unauthorized accessories is not
covered under warranty.
NOTE: The Ni-MH rechargeable battery pack and Li-Ion rechargeable battery are not charged
when you receive them. Make sure to completely charge them before using them with
your camera (see page 10).
See your camera user’s guide for more information on compatible batteries
and installation.
If your camera came with
non-rechargeable starter batteries:
If your camera came with a
rechargeable Li-Ion battery:
OR
Lithium 2 AA, 1.5 V
use the Ni-MH
rechargeable
battery pack
that came with
the printer dock
3 V, CRV3
Do not use the Ni-MH
rechargeable battery pack that
came with the printer dock
install it in your camera.