Filter
Top Products
Troubleshooting
40 www.kodak.com/go/support
Print light
Light status Cause Action/solution
Light glows steady
green
The printer dock is ready for
printing.
None required.
Light blinks green The printer dock is printing.
Light is off There are no pictures in the
camera or on the card.
None required.
To enable Print:
1 Take pictures.
2 Dock camera, or connect
Kodak 8-in-1 card reader. If
using card reader, make
sure card is inserted.
Camera is not docked or
Kodak 8-in-1 card reader is
not connected.
Camera is not properly seated
on connector.
Reseat the camera on the
printer dock (page 10).
Camera is transferring
pictures to the computer, or
has established an active
connection to the computer.
None required.
When transfer is complete,
press the blinking Transfer
button, .
A PictBridge compatible
device is connected.
None required.
Print button is disabled; print
command is controlled from
PictBridge device.