Filter
Top Products
Troubleshooting
42 www.kodak.com/go/support
Still having problems?
Visit www.kodak.com/go/support, or see Chapter 8, Getting help.
Transfer light
Light status Cause Action/solution
Light glows steady
green
The printer dock is ready for
transferring pictures.
None required.
Light blinks green Pictures are being
transferred to the
computer.
None required.
After transferring pictures, the
transfer light continues to blink
green until either the Transfer
button is pressed again or the
connection has timed-out.
Light is off There are no pictures in the
camera or on the card.
None required.
To enable Transfer:
1 Connect printer dock to
computer (page 21).
2 Take pictures.
3 Dock camera, or connect Kodak
8-in-1 card reader. If using card
reader, make sure card is
inserted.
Camera is not docked or
Kodak 8-in-1 card reader is
not connected.
The printer dock is not
connected to the computer.
Camera is not properly
seated on connector.
Reseat the camera on the printer
dock (page 10).
The printer dock may be
printing in standalone
mode.
The Transfer button is disabled.
The computer is off. Turn on the computer.