Kodak printer dock Printer User Manual


 
Troubleshooting
www.kodak.com/go/support
39
Battery charging lights
Light status Cause Action/solution
All lights are off Camera may not be properly
seated on connector.
Reseat the camera on the
printer dock (page 10).
Camera is turned on. Turn off the camera.
Unrecognized battery type is
installed.
Install a Kodak EasyShare
Ni-MH rechargeable battery
pack or Kodak EasyShare
Li-Ion rechargeable battery
(page 8).
One steady green light Camera was just placed in
camera dock.
None; dock is checking the
charge status of the battery.
Ascending steady green
lights
Battery is charging. Charging
is complete when all three
lights are lit.
Leave camera on dock to
continue charging or
maintain charge.
One blinking red light Battery is not properly
installed.
Re-install the battery.
Battery or connector pin is
damaged.
Check for damage.
Camera and battery have
been exposed to extreme
temperatures.
Slowly return the camera and
battery to room temperature.
Descending blinking
green lights
Ni-MH battery pack refresh
cycle in progress: discharging
(lights turn off as discharging
progresses).
Leave camera on dock to
continue refresh cycle
(page 11).