Filter
Top Products
103
(5) Removal of the High Voltage Unit
1. Open the Right-side Door.
2. Remove the Top Front Cover.
3. Remove the Top Cover.
4. Remove the Rear Cover.
5. Remove the Left-side Cover.
6. Remove the Controller Protective Cover.
7. Remove the harness and connector.
8. Remove seven screws and the Controller Board
(PWB-P).
4131D055AB
9. Remove seven screws and the Controller Box.
4131D016AA
10. Remove the connector and PWB support.
11. Remove four screws and the High Voltage Unit
(HV).
4131D017AA