Filter
Top Products
115
(7) Removal of the Manual Feed Take-up Solenoid
1. Remove the Top Front Cover.
2. Remove the Top Cover.
3. Remove the Rear Cover.
4. Remove the Left-side Cover.
5. Remove the Right-side Door.
6. Remove the Front Cover.
4. Remove the harness and connector.
5. Remove one screw and the Duplex Unit Cover.
4131D048AA
6. Remove two screws and the Duplex Unit Turn-
over Motor.
7. Remove two screws and the Duplex Unit Trans-
port Motor.
4131D049AA
7. Remove the harness and connector.
8. Remove five screws and the Master Board
(PWB-A).
4131D009AA
9. Remove seven screws and the Controller Box.
4131D016AA