Filter
Top Products
92
(8) Cleaning of the Laser Lens Cover
(9) Replacement of the Second Image Transfer Roller
1. Open the Front Door.
2. Remove the Waste Toner Bottle.
3. Withdraw the Laser Lens Cover.
4. Wipe the lens of the Laser Lens Cover clean of
dirt using a soft cloth dampened with alcohol.
C4131o043AA
1. Remove the Right-side Door.
2. While pulling the bushings (white) at the front and
rear ends of the 2nd Image Transfer Roller to the
rear and to the front, respectively, place them
down to the right. Then, remove the 2nd Image
Transfer Roller from the 2nd Image Transfer
Roller Holder.
3. To reinstall, reverse the order of removal.
4. Select functions as follows: Engine/Service ->
Power On Test. Then, execute ATVC.
4131D004AA