Filter
Top Products
119
(11) Removal of the Belt Cleaner Separation Solenoid
1. Open the Right-side Door.
2. Remove the Top Front Cover.
3. Remove the Top Cover.
4. Remove the Rear Cover.
5. Remove the Left-side Cover.
6. Remove the Controller Protective Cover.
7. Remove the harness and connector.
8. Remove two screws and the Power Supply Cool-
ing Fan Motor.
4131D010AA
9. Remove seven screws and the Controller Box.
4131D016AA
10. Remove the connector and PWB Support.
11. Remove four screws and the High Voltage Unit
(HV).
4131D017AA
12. Remove one screw and the Belt Cleaner Separa-
tion Solenoid.
4131D068AA