Filter
Top Products
136
2-3. Service Mode
This mode is used to check and specify service functions.
2-4. Service mode displays
2-5. Entering service mode
<Procedure>
1. With the menu “ENGINE” selected, press the Down key.
2. Press the Prev. key until “SERVICE” is displayed.
3. Press the Select key to display “FACE COUNT”.
4. Press both the Select and the Down keys at the same time for at least 2 seconds.
5. With “SERVICE PERSON” displayed, press the Down key.
<Cancelling procedure>
• Press the Cancel key.
2-6. Service mode options
(1) RESTORE FACTORY DEFAULT
• Select this option to restore all settings to their defaults.
Language, Energy Saver, Auto Continue, Chaining Tray, IP Address, Subnet Mask, Gateway, DHCP/
BOOTP, All toner max life=1500, All remaining=100%, All counters, CPU counters for service, PSL
admin password.
(2) SERVICE PERSON SRU USAGE
MAGENTA TONER
XXX% REMAINING
Indicates the percentage of magenta toner remaining in the cartridge.
CYAN TONER
XXX% REMAINING
Indicates the percentage of cyan toner remaining in the cartridge.
DRUM UNIT
XXX% REMAINING
Indicates the percentage of the life of the drum unit remains.
Service FACE COUNT SERVICE
SERVICE PERSON
RESTORE FACTORY
DEFAULT
CONTROLLER
VER.
SERVICE PERSON
SRU USAGE
ENGINE VER. RESET CONTROLLER
DIMM TEST RESET COUNTER
FUSER UNIT
SDRAM TEST
POWER ON TEST
RESET COUNTER
TRANSFER UNIT
RESTORE USER
DEFAULT