Filter
Top Products
System Menu
3-18
Original Orientation
Set the default original orientation.
1
Display the Machine default screen. (See How to Display the Machine Default Screen on
page 3-12.)
2
Press the S key or the T key to select Orig.
direction.
3
Press the Enter key.
4
Press the S key or the T key to select Rear [Back
Edge] or Left top [Left].
5
Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
Auto Sleep Time
Set the time that elapses before the auto sleep function is activated if you have turned on the auto
sleep function (see page 3-23).
Time that can be set:
Inch Specification — 1 to 240 minutes (in 1 minute increments)
Metric Specification — 1 to 120 minutes (in 1 minute increments)
Note • It is recommended to set a longer time if you use the machine frequently, and to set a shorter
time if not.
• For the inch specification machine, if the auto sleep function causes inconvenience for
operation of this machine, disable this function. It is recommended, however, to set a longer
time before disabling this function.
• On the inch specification machine, if you have disabled the auto sleep function, this item is not
displayed.
1
Display the Machine default screen. (See How to Display the Machine Default Screen on
page 3-12.)
2
Press the S key or the T key to select Sleep mode
time.
3
Press the Enter key.
4
Press the < key or the > key to select the desired time
from 1 to 240 minutes [1 to 120 minutes].
5
Press the Enter key.
Machine default:
Orig. direction
Special P. type
P. type (Duplex)
Fast Mode:
Rear:
Orig. direction
Rear
Left top
*
Machine default:
Sleep mode time
Orig. direction
Special P. type Fast Mode:
Rear:
30Min.:
1-240Min.
Sleep mode:
30Min.