Kyocera 2050 All in One Printer User Manual


 
Printer Settings
2-44
RAM Disk Operation
RAM Disk Functions
This machine is equipped with RAM disk functions. The RAM disk is a virtual disk unit that uses a
part of the memory. If you assign a certain size of the memory to the RAM disk, you can use the
RAM disk for electronic sorting (for reduction of total print time) and storage and reading of data.
Also you can use the e-MPS function (see page 2-8).
Important! Note that data written to the RAM disk is deleted when this machine is reset or the main power
switch is turned off ({).
The RAM disk area is assigned from the user available memory. Consequently, note that
printing speed may be lower or insufficient memory occurs depending on the RAM disk setting
value.
The RAM disk functions are disabled at the default setting. To use the RAM disk functions, set as
follows.
1
Press the Printer key.
2
Press the S key or the T key to select MENU.
3
Press the Enter key.
4
Press the S key or the T key to select RAM Disk
Mode.
5
Press the Enter key.
6
Press the S key or the T key to select On.
7
Press the Enter key. Change # is displayed.
8
Press the Reset key.
9
Press the S key or the T key to select Yes.
10
Press the Enter key. This machine restarts.
RAM Disk Operation
1
Press the Printer key.
GO
CANCEL
Ready
MENU
Menu
Page Set
Print Quality
RAM Disk Mode
Back
On
RAM Disk Mode
Off
Yes
No
Do you want to restart?