Filter
Top Products
Job Accounting
4-3
How to Display the Job Accounting Screen
Use the following procedure to display the Job Accounting screen.
1
Press the System Menu/Counter key.
2
Press the S key or the T key to select Job
Accounting.
3
Press the Enter key.
4
Use the numeric keys to input the four-digit
management code. The management code at the
factory default setting is 1600 for the 16 ppm model,
2000 for the 20 ppm model, and 2500 for the 25 ppm
model.
Note The four-digit management code can be changed. (See Administrator Management Code
Change on page 3-23.)
5
If the management code is accepted, the Job
Accounting screen is displayed.
Next, perform the setting referring to the following
description of each setting item.
Counter check
Print Report
System Menu / Counter:
Job Accounting
Enter pin code using # key.
Each Job Accounting TL
Job Accounting:
End
Job Accounting Total
[]On