Kyocera 2050 All in One Printer User Manual


 
Printer Settings
2-39
Writing Data
1
Display the Memory Card screen. (See How to Display the Memory Card Screen on page 2-37.)
2
Press the S key or the T key to select Write Data.
3
Press the Enter key.
4
Press the S key or the T key to select OK.
5
Press the Enter key. GO and CANCEL are displayed.
Note If you select CANCEL and press the Enter key, data is not written.
6
Send data from your computer to this machine.
When the data is received, the message display of this machine changes to Processing data.
When reception is complete, the message display changes to Waiting.
7
Press the S key or the T key to select GO.
8
Press the Enter key. The data is written to the memory card.
Deleting Data
1
Display the Memory Card screen. (See How to Display the Memory Card Screen on page 2-37.)
2
Press the S key or the T key to select Delete Data.
3
Press the Enter key.
4
Press the S key or the T key to select the data to delete.
5
Press the Enter key. The selected data is deleted from the memory card.
6
Press the Reset key. The message display returns to the printer basic screen.
Deleting Font Data
1
Display the Memory Card screen. (See How to Display the Memory Card Screen on page 2-37.)
2
Press the S key or the T key to select Delete Font.
3
Press the Enter key.
4
Press the S key or the T key to select the font to delete.
5
Press the Enter key. The selected font is deleted from the memory card.
Memory Card
Read Data
Read Program
Write Data
Memory Card
Read Program
Write Data
Delete Data
Memory Card
Write Data
Delete Data
Delete Font