Filter
Top Products
FAX System Settings
7-4 OPERATION GUIDE
Printing Reports
Print reports on the details of fax transmission and reception. Choose
automatic report printing, or choose to disable this feature.
Fax TX Report
Prints communication details after the specified number of transmissions.
For instructions on using this feature, refer to
Fax TX Report and Fax RX
Report Settings on page 7-4.
Fax RX Report
Prints communication details after the specified number of receptions. For
instructions on using this feature, refer to
Fax TX Report and Fax RX
Report Settings on page 7-4.
Send Result
Prints a report confirming transmission success or failure after fax. If you
prefer, you can set the system to print only after errors or subaddress-
based confidential transmission. For instructions on using this feature,
refer to
Send Result Settings on page 7-5.
NOTE: You can set the FAX System to notify you of transmission results
by e-mail. For more information, refer to
E-mail Notification of Job Results
on page 5-45.
Fax RX Result
Prints a report confirming reception success or failure after faxes are
received. If you prefer, you can set the system to print only after errors or
subaddress-based confidential reception. You can also set up notification
of the reception results so that such notification is e-mailed rather than
printed. For instructions on using this feature, refer to
Fax RX Result
Settings on page 7-5.
Fax TX Report and Fax RX Report Settings
Perform the following procedure to set up fax transmission and/or
reception reporting.
1
Press System Menu/Counter.
2
Press S or T to select Report. Press Enter.
3
Press S or T to select Report Setting. Press Enter.
4
Press S or T to select FAX TX Report or FAX RX Report. Press Enter.