Filter
Top Products
Basic Operation
3-4 OPERATION GUIDE
Sending Documents
The basic method for sending documents is described below.
1
Press Send. The Send indicator
is lit, and the FAX System enters
Send mode.
The Send screen is displayed on
the message display.
2
Choose the fax mode. Select from memory transmission mode or direct
transmission mode. (The default setting is memory transmission mode.)
To choose direct transmission mode, follow the procedure given in
Direct
Transmission on page 4-7.
Memory transmission mode
The FAX System scans the original document into memory before dialing
the other party’s fax number. You can choose multiple recipients in this
convenient mode. When the FAX System finishes scanning the original
document into memory, the document is ejected while transmission is
underway.
Direct transmission mode
The FAX System contacts the other party before scanning the original
document. When sending multiple pages, the FAX System sends one full
page before scanning the next.
Ready to send.
2005/01/08 11:09
SubjectPlacemnt
Left Off