Filter
Top Products
Basic Functions
OPERATION GUIDE 4-7
Direct Transmission
The FAX System starts scanning original documents after contacting the
destination fax. If a multi-page original document is loaded in the
document
processor
, the FAX System will scan and transmit one page of the
document at a time.
If the original document is placed on the platen, the alarm notifies to place
the next page when scanning the previous page is completed. If another
page is not loaded within 15 seconds after the
alarm (or within the time set
for Auto Reset), the
FAX System assumes that the job has no other pages
and ends the fax transmission.
NOTE: Automatic Redialing is not available during Direct Transmission.
Direct Transmission cannot be used with Broadcast Transmission, Timer-
based Transmission, or Polling transmission.
1
Place the original documents to transmit in the document processor or on
the platen.
2
Press Send.
3
Press Function.
4
Press S or T to select FAX Direct TX. Press Enter.
5
Press S or T to select On. Press
Enter.
6
Press right Select.
7
Enter the destination fax number.
You can use one-touch dial, Address Book, or chain dial to enter the
destination fax number.
8
Press Start to start dialing the destination fax number.
The FAX System begins scanning the document after establishing a
connection.
*
FAX Direct TX
On
Off*
Cancel
: