Filter
Top Products
FAX System Parts
1-4 OPERATION GUIDE
9 Memory Indicator
This indicator is lit when documents are temporarily stored in
memory before printing or fax. The indicator flashes during
scanning and reception when documents are stored in memory.
10 Error Indicator
This indicator is lit or flashes if an error occurs.
11 System Menu/Counter Key and Indicator
Press this key to change the initial settings or check the counter.
12 Log Out Key and Indicator
Press this key after completing a task using job accounting.
13 Numeric Keys
Use the numeric keys to enter the fax number of another party or
for other number input. Even with pulse dialing, you can press the
key after the other party responds to send the next number as
a tone signal.
14 Reset/Power Key
Press this key to cancel the setting and return to the basic screen.
Hold the key for more than 2 seconds to turn the FAX System into
Auto Sleep.
15 Original Quality Key and Indicator
Press this key to set the document image quality.
16 Original Size Key and Indicator
Press this key to select the document size.
17 Exposure Key and Indicator
Press this key to adjust the document exposure level.
18 Message Display
Displays procedures and error messages.
19 Left Select Key
Press this key to select the left item on the bottom of the message
display.
20 Right Select Key
Press this key to select the right item on the bottom of the
message display.
21 Back Key
Press this key to return to the previous, upper menu.
22 W Destination Key
Press this key to move the cursor to the left on the message
display or to enter a destination.
23 S Address Recall Key
Press this key to move the cursor up on the message display or
for Address Recall.