Filter
Top Products
Section 7: Downloading Characters and Fonts
130
Printing the Character
To print the ampersand symbol, send the following command sequence:
Designing Monospaced Draft Characters
When designing monospaced draft characters, design the character for 10 cpi
output and use as many dot-columns as possible. This method also creates a
better designed 12 cpi draft character.
To design a draft character, start with a grid that is 9 dots wide by 24 dots high.
Although the character matrix for a draft character is 10 dots wide, the last
column must be blank.
<x
1B49 - ESC,I - select print mode
04 - draft, 10 cpi
1B5B64 - ESC,[,@ - select print quality
0100 - byte count (low byte first) - x0001, 1
01 - print quality = Fast Draft
1B5E - print one character command
26 - print character x26, ASCII 38 - ampersand
>