Filter
Top Products
83
Section 5: OKI Microline Emulation Mode Printer Commands
Custom Characters
Graphics Print Modes
Name Dec Hex Description
ESC $ 27 36 1B 24 Copy ROM Character Set to RAM Character Set
Copies a complete set of the characters resident in
the printer to the area of its memory reserved for
custom characters.
ESC % A 27 37 65 m
n1...n11
1B 25 41 m
n1...n11
Down Line Load Ascender Characters
Begins downloading an ascender character.
ESC % D 27 37 68 m
n1...n11
1B 25 44 m
n1...n11
Down Line Load Descender Characters
Begins downloading an descender character.
ESC 2 27 50 1B 32 Set DLL in Draft Mode
Switches custom character printing on when the
printer is set for the Draft print mode.
ESC 7 27 55 1B 37 Select DLL NLQ mode
Switches custom character printing on when the
printer is set for the NLQ print mode.
Name Dec Hex Description
ESC P 27 80 1B 50 Single Density Graphics
ESC Q 27 81 1B 51 Single Density Graphics
ESC R 27 82 1B 52 Double Density Graphics
ESC # Q 27 35 81 1B 23 51 Double Speed and Quadruple Density Graphics
ESC * 27 42 n1 n2
58
1B 2A n1 n2
3A
Select Graphics Mode
Selects the density and defines the speed and
"word size." For more information, see Table 2 and
Table 3 on page 84.
ETX 3 03 Select Graphics Print Mode
ETX STX 3 2 03 02 Cancel Graphics Print Mode
ETX LF 3 10 03 0A Graphics Line Feed with Carriage Return (Text)
ETX SO 3 14 03 0E Graphics Line Feed with Carriage Return
(Graphics)
ETX DC2 3 18 03 12 Graphics Line Feed without Carriage Return
(Text)
ETX DC4 3 20 03 14 Graphics Line Feed without Carriage Return
(Graphics)