Filter
Top Products
35
Section 3: IBM Emulation Mode Printer Commands
located in the code page tables beginning on page 188.
Print One Character
Use this command to print a character from the All Characters Chart of a Code
Page (see “Code Pages” on page 187).
Usage Note
Substitute the decimal or hexadecimal digit of the character you want to print
for the variable n.
Download a Character Set
This command downloads a character set to the printer and starts a character
font image download. Up to 256 consecutive characters can be downloaded in
each ESC = sequence.
To download fonts, download must be enabled in the Setup menu.
Usage Notes
count low/count high
The number of bytes of data being downloaded starting with the printer id byte.
id
A 1-byte number identifying the printer.
Format ESC ^ n
Decimal 27 94 n
Hex 1B 5E n
Format ESC = count low/high id start low/high data
Decimal 27 61 count low/high id start low/high data
Hex 1B 3D count low/high id start low/high data
Printer
Dec Hex
2480 Plus
182 B6
2481 Plus
184 B8
2490 Plus
183 B7
2491 Plus
185 B9