Filter
Top Products
Section
Section 2: Set Initial Conditions (SIC) Command
21
2
Set Initial
Conditions (SIC)
Command
The SIC command sets the printer to the default values that were set at the
factory or to user-defined defaults.
SIC Command Format
Use the following format:
Ln is the number of parameters plus 2. Hn is 0.
The decimal and hexadecimal digits for the printer command appear below the
printer command format.
Format ESC [ K Ln Hn init ID p1...p22
Decimal 27 91 75 Ln Hn
Hex 1B5B4BLnHn