Filter
Top Products
81
Section 5: OKI Microline Emulation Mode Printer Commands
Character Size and Spacing
Name Dec Hex Description
RS 30 1E Print 10 Characters per Inch
FS 28 1C Print 12 Charaters per Inch
ESC g 27 103 1B 67 Print 15 Charaters per Inch
GS 29 1D Print 17.1 Charaters per Inch
ESC # 3 27 35 51 1B 23 33 Print 20 Charaters per Inch
ESC J 27 74 1B 4A Start Superscript Printing
ESC K 27 75 1B 4B Stop Superscript Printing
ESC L 27 76 1B 4C Start Subscript Printing
ESC M 27 77 1B 4D Stop Subscript Printing
ESC US 31 1F Begin Double-Width Printing
ESC US 1 27 31 49 1B 1F 31 Begin Double-Height Printing
ESC US 0 27 31 48 1B 1F 30 End Double-Height Printing
ESC & 27 38 n1 n2
n3 n4 58
1B 26 n1 n2
n3 n4 3A
Select Print Features
Selects print quality, character pitch and
other print features. See the Table 1 on
page 82 for the features applicable to
each variable and the value of each. To
calculate the total value of a variable,
add the values (column 1) of each
feature you want to use, and then add
that sum to the variable factor (bottom
row).
Note: You may enter any combination of
the variables (n1 to n4) in any order.
ESC Y 27 89 1B 59 Select Porportional Spacing
Adjusts the space between letters to
compensate for the varying widths of
individual characters.
Note: Available only with Near Letter
Quality (NLQ) and Draft printing.
ESC Z 27 90 1B 5A Cancel Porportional Spacing
ESC N 27 78 n 1B 4E n
Select Intercharacter Spacing
Adds additional spacing to the right of
each character. Valid values for n must
be between 0 and 11.