Filter
Top Products
Section 5: OKI Microline Emulation Mode Printer Commands
84
Table 2. Density
To calculate the density (value for n1),
1 Locate the dpi and density you want from the above table.
2 Select the corresponding n1 values for each.
3 Add the values selected in step 2.
4 Add 96 to the total.
Example: For 60 dpi printing at quadruple density, calculate the value of n1 as
follows: n1=1+16+96=113
Table 3. Speed and Word Size
To calculate the speed and word size (value for n2),
1 Locate the speed you want from the above table.
2 Select the corresponding n2 value.
3 Locate the word size (7 or 8-bit graphics).
4 Select the corresponding n2 value.
ETX ETX 3 3 03 03 Stored graphics data in one dot column buffer
Determines the graphics setting. In 7-bit mode, the
graphic setting is 14/144"; in 8-bit graphics mode,
it is 16/144"
n1
Dots per inch/Density
1
60 dpi
2
72 dpi
4
Single density
8
Double density
16
Quadruple density
n2
Speed/Word Size
0
Normal speed
8
Double speed
0
7-bit graphics
16
8-bit graphics
Name Dec Hex Description