Filter
Top Products
75
Section 4: Epson Emulation Mode Printer Commands
Page Format
Printer Control
ESC 3 27 51 n 1B 33 n
Set Graphics Line Spacing - 248x only
Use a line spacing of 24/216 for bit-image graphics
using 8 bits. n must be a 1-byte decimal value from
0 to 255. To move exactly n/216 inch per line, n
must be an integer multiple of 3.
Set Graphics Line Spacing - 249x only
Sets line spacing to n/180 inches per line.
ESC A 27 65 1B 41 Set n/72 Inch Line Spacing
Sets line spacing to n/72 inch for subsequent line
feed command. The value of n must be between 0
and 85.
ESC b 27 98 m
n1...n16 0
1B 62 m
n1...n8 00
Set Vertical Tabs in Channel
Sets vertical tab stops in specified channel by m.
m must be a one-byte decimal value from 0 to 7.
Name Dec Hex Description
ESC C 0 27 67 0 m 1B 43 00 m
Set Page Length to m Inches
ESC C 27 67 n 1B 43 n
Set Page Length to n Lines
ESC N 27 78 n 1B 4E n Set Skip Perforation
Creates a bottom margin by skipping n lines. Valid
values of n are 0 through 255.
ESC O 27 79 1B 4F Cancel Skip Perforation
Cancels the skip perforation function.
Name Dec Hex Description
ESC s 27 115 1B 73 Turn Half Speed Mode On/Off -248x only
ESC EM 27 25 n 1B 19 n
Auto Sheet Feeder On/Off
n=0 Off
n=4 On
n=R Eject
ESC B 27 66 0 n1
n2...n16 0
1B 42 0 n1,
n2...n16 00
Set Vertical Tab Stops
Sets up to 16 tab stops. The sequence ends with 0.
FF 12 0C Form Feed
Advances the paper to the top of the next page.
Name Dec Hex Description