Filter
Top Products
Section 3: IBM Emulation Mode Printer Commands
58
Set Line Spacing for Text
This command sets line spacing in n/72 inch increments. To activate the line
spacing, use the printer command Activate Line Spacing for Text (ESC 2).
Usage Note
The value for n must be between 1 and 85.
Set Line Spacing for Graphics
This command sets line spacing to n/216 inches. It does not cause the form to
move. It changes the vertical distance moved when a line feed command is
received.
Usage Notes
• The number can be from 0 to 255 (decimal), 00 to FF (hexadecimal).
• n must be a multiple of 3 to advance exactly n/216 inches.
Porportional Space Mode
This command turns porportional space mode on and off.
Usage Notes
• Porportional spacing is ON when n is set to 0 (decimal) or 00 (hexadeci-
mal).
• Porportional spacing is OFFwhen n is set to 1 (decimal) or 01 (hexadeci-
mal).
Format ESC A n
Decimal 27 65 n
Hex 1B 41 n
Format ESC 3 n
Decimal 27 51 n
Hex 1B 33 n
Format ESC P n
Decimal 27 80 n
Hex 1B 50 n