Filter
Top Products
77
Section 4: Epson Emulation Mode Printer Commands
ESC & 27 38 0 n1
n2 d1 data
1B 26 0 n1
n2 d1 data
Define Download Characers
ESC : 27 58 0 n 0 1B 3A 00 n
00
Copy Normal Characters from ROM to RAM
ESC < 27 60 1B 3C Select Left-to-Right Printing
ESC = 27 61 1B 3D Set MSBs to Zero
Sets the MSBs of all data sent to the printer to 0.
ESC > 27 62 1B 3E Set MSBs to One
Sets the MSBs of all data sent to the printer to 1.
ESC W 27 87 n 1B 57 n
Begin or End Continuous Double-Wide Printing
n=0 End
n=1 Begin
ESC [f 27 91 102 1B 5B 66 Setup Barcode Parameter
This command is the same as the ESC [f command
in the IBM mode. (See page 32.)
ESC [f 27 91 112 1B 5B 70 Setup Barcode Data
This command is the same as the ESC [p command
in the IBM mode. (See page 32.)
SI 15 0F Start 17 cpi printing
SO 14 0E Begin Double-Wide Printing by Line
ESC SO 27 14 1B 0E Select Double-Wide
ESC SI 27 15 1B 0F Select Condensed Mode
DC2 18 12 Cancel Condensed Mode
DC4 20 14 End Double-Wide Printing by Line
ESC : 27 58 1B 3A Set 12 Pitch Font
Name Dec Hex Description