Filter
Top Products
57
Section 3: IBM Emulation Mode Printer Commands
• ESC R (Set Default Tabulation Stops) and ESC B 0 will clear all vertical tab
stops.
• Set the tabulation stops in ascending order (n1.....n64).
• The last digit in the sequence must be a 0 to terminate the command.
Line Spacing
Set Line Spacing to 1/8 Inch
This command (ESC zero) sets the line spacing at 1/8 inch between each line,
which is 8 lines per inch (lpi).
Set Line Spacing to 7/72 Inch
This command sets the line spacing at 7/72 inch between each line, which
is 10.3 lpi.
Activate Line Spacing for Text
This command activates the line spacing designated by the Set Line Spacing for
Text (ESC A) printer command.
Format ESC 0
Decimal 27 48
Hex 1B 30
Format ESC 1
Decimal 27 49
Hex 1B 31
Format ESC 2
Decimal 27 50
Hex 1B 32