Filter
Top Products
Use To
Timeouts
Print Timeout
Disabled
1–255
Set the amount of time the printer waits to receive an end‑of‑job
message before canceling the rest of the print job.
Notes:
• 90 seconds is the factory default setting.
• When the timer expires, any partially printed page is printed,
and then the printer checks to see if any new print jobs are
waiting.
• Print Timeout is available only when using PCL emulation.
Timeouts
Wait Timeout
Disabled
15–65535
Set the amount of time the printer waits for additional data before
canceling a print job.
Notes:
• 40 seconds is the factory default setting.
• Wait Timeout is available only when the printer is using
PostScript emulation.
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Automatically reboot the printer.
Note: Reboot always is the factory default setting.
Error Recovery
Max Auto Reboots
1‑20
Determine the number of automatic reboots the printer can
perform.
Notes:
• 2 is the factory default setting.
• If the printer reaches the maximum number of reboots
within a certain amount of time, the printer does not
continue to reboot, and the error message appears on the
display.
Print Recovery
Auto Continue
Disabled
5–255
Let the printer automatically continue printing from certain offline
situations when these are not resolved within the specified time
period.
Note: Disabled is the factory default setting.
Print Recovery
Jam Recovery
On
Off
Auto
Specify whether the printer reprints jammed pages.
Notes:
• Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
• On sets the printer to always reprint jammed pages.
• Off sets the printer to never reprint jammed pages.
Understanding the printer menus 114