Filter
Top Products
unexpected page breaks
occur 200
printer 23
minimum clearances 9
moving 9, 160
selecting a location 9
shipping 160
printer configurations 10
basic model 10
configured model 10
printer control panel
adjusting brightness 146
factory defaults, restoring 163
indicator light 13
Sleep button light 13
using 12
Printer had to restart. Last job may
be incomplete. 184
printer information
where to find 8
printer is printing blank pages 210
printer messages
[x]‑page jam, clear manual feeder.
[25y.xx] 173
[x]‑page jam, clear standard bin.
[20y.xx] 170
[x]‑page jam, open automatic
feeder top cover. [28y.xx] 175
[x]‑page jam, open front door.
[20y.xx] 166
[x]‑page jam, open rear door.
[20y.xx] 169
[x]‑page jam, open tray [x].
[24y.xx] 172
Cartridge low [88.xy] 176
Cartridge nearly low [88.xy] 176
Cartridge very low, [x] estimated
pages remain [88.xy] 176
Change [paper source] to [custom
string] load [paper
orientation] 176
Change [paper source] to [custom
type name] load
[orientation] 176
Change [paper source] to [paper
size] load [orientation] 177
Change [paper source] to [paper
type] [paper size] load
[orientation] 177
Close flatbed cover and load
originals if restarting job
[2yy.xx] 177
Close front door 177
Complex page, some data may not
have printed [39] 177
Defective flash detected [51] 178
Error reading USB drive. Remove
USB. 178
Error reading USB hub. Remove
hub. 178
Fax memory full 178
Fax partition inoperative. Contact
system administrator. 178
Fax server 'To Format' not set up.
Contact system
administrator. 178
Fax Station Name not set up.
Contact system
administrator. 178
Fax Station Number not set up.
Contact system
administrator. 179
Imaging unit low [84.xy] 179
Imaging unit nearly low
[84.xy] 179
Imaging unit very low, [x]
estimated pages remain
[84.xy] 179
Incorrect paper size, open [paper
source] [34] 179
Insufficient memory for Flash
Memory Defragment operation
[37] 180
Insufficient memory to collate job
[37] 180
Insufficient memory to support
Resource Save feature [35] 180
Insufficient memory, some Held
Jobs were deleted [37] 180
Insufficient memory, some held
jobs will not be restored
[37] 180
Load [paper source] with [custom
string] [paper orientation] 181
Load [paper source] with [custom
type name] [paper
orientation] 182
Load [paper source] with [paper
size] [paper orientation] 182
Load [paper source] with [paper
type] [paper size] [paper
orientation] 182
Load manual feeder with [custom
string] [paper orientation] 180
Load manual feeder with [custom
type name] [paper
orientation] 181
Load manual feeder with [paper
size] [paper orientation] 181
Load manual feeder with [paper
type] [paper size] [paper
orientation] 181
Maintenance kit low [80.xy] 182
Maintenance kit nearly low
[80.xy] 183
Maintenance kit very low, [x]
estimated pages remain
[80.xy] 183
Memory full [38] 183
Memory full, cannot print
faxes 183
Memory full, cannot send
faxes 183
Network [x] software error
[54] 183
No analog phone line connected
to modem, fax is disabled. 184
Non‑Lexmark [supply type], see
User’s Guide [33.xy] 184
Not enough free space in flash
memory for resources [52] 184
Printer had to restart. Last job
may be incomplete. 184
Reinstall missing or unresponsive
cartridge [31.xy] 185
Reinstall missing or unresponsive
imaging unit [31.xy] 185
Remove paper from standard
output bin 185
Replace all originals if restarting
job. 185
Replace cartridge, 0 estimated
pages remain [88.xy] 185
Replace cartridge, printer region
mismatch [42.xy] 186
Replace defective imaging unit
[31.xy] 186
Replace imaging unit, 0 estimated
pages remain [84.xy] 186
Replace jammed originals if
restarting job. 187
Replace maintenance kit, 0
estimated pages remain
[80.xy] 187
Replace unsupported cartridge
[32.xy] 187
Index 258