Filter
Top Products
2-3 4059 Service Manual
4059-XXX
910 DC Pick
Motor DC Pick
Motor Stall
Error Codes 910,911,912,913 and 914 are indications
that a Tray 1 paper feed problem has been detected. Go
to the “Input Tray(s) Option Service Check” on
page 2-58.
911 DC Pick
Motor Excessive
PWM
912 DC pick
motor below
speed
913 DC pick
motoroverspeed
914 DC pick
motor: No
encoder feedback
917 Transfer Roll Indicates a problem in the transfer roll area. Go to the
“Transfer Roll Service Check” on page 2-105.
920 Fuser Error Indicates that the fuser is below temperature when
printing. Go to the “Cold Fuser Service Check” on
page 2-48.
921 Fuser Error Indicates that the fuser is below standby temperature
when the printer is idle. Go to the “Cold Fuser Service
Check” on page 2-48.
922 Fuser Error Fuser failed to reach standby temperature. Go to the
“Cold Fuser Service Check” on page 2-48.
923 Fuser Error Fuser is too hot during printing or when printer is idle. Go
to the “Hot Fuser Service Check” on page 2-50.
924 Fuser Error An open circuit has been detected in the Fuser
Thermistor Circuit. Go to the “Hot Fuser Service Check”
on page 2-50.
925 Fuser Error Wrong fuser lamp installed. Check the fuser lamp for the
correct type of lamp that should be installed.
927 Fan Stalled Indicates a printer fan stalled. Go to the “Fan Service
Check” on page 2-47.
928 Erase Lamps Indicates that the engine has detected that either the
erase lamp assembly is missing or disconnected. Go to
the “Erase Lamp Service Check” on page 2-46.
Error Code Action