Filter
Top Products
128
e When you see A=10 (or other number), press Menu until you find the number value you want to
use, and then press
Select. A Saved message briefly appears and then the next test alignment
is displayed.
If no changes are necessary, press
Return to return to the Utilities Menu.
f After you have completed all twelve settings, Utilities Menu appears. Press Go.
The printer returns to the Ready state.
Removing memory and option cards
To remove memory or option cards, use the following illustration to locate the connector for the card you
want to remove.
Accessing the printer system board
1 Turn the printer off.
2 Unplug the printer power cord.
3 Disconnect all cables from the back of the printer.
4 Locate the access cover on the back of the printer.
Firmware and flash
memory card connectors
Option card connector
Hard disk connector
Memory card connector