Filter
Top Products
87
40 <color>
Invalid Refill
The printer has detected an
unsupported refilled cartridge.
Remove the indicated print cartridge and
install a new one.
See also: Replacing print cartridges
50 PPDS Font Error
The PPDS interpreter has
encountered a font error.
•Press Go to clear the message and
continue printing.
•Press Menu to open the Job Menu and
reset the printer or cancel the print job.
51 Defective Flash
The printer detects defective flash
memory.
Press Go to clear the message and
continue printing. You must install different
flash memory before you can download any
resources to flash.
52 Flash Full
There is not enough free space in the
flash memory to store the data you are
trying to download.
•Press Go to clear the message and
continue printing. Downloaded fonts and
macros not previously stored in flash
memory are deleted.
• Delete fonts, macros, and other data
stored on the flash memory.
• Install flash memory with more storage
capacity.
53 Unformatted Flash
The printer detects unformatted flash
memory.
•Press Go to clear the message and
continue printing. You must format the
flash memory before you can store any
resources on it.
• If the error message remains, the flash
memory may be defective and require
replacing.
54 Serial Option <x>
Error
The printer has detected a serial
interface error on a serial port.
• Make sure the serial link is set up
correctly and you are using the
appropriate cable.
•Press Go to clear the message and
continue printing. The job may not print
correctly.
•Press Menu to open the Job Menu and
reset the printer.
54 Standard Serial
Error
54 Network <x>
Software Error
The printer cannot establish
communications with an installed
network port.
•Press Go to clear the message and
continue printing. The job may not print
correctly.
• Program new firmware for the network
interface by way of the parallel port.
•Press Menu to open the Job Menu and
reset the printer.
54 Std Network
Software Error
54 Std Par ENA
Connection Lost
The printer has lost the connection to
an external print server (also called an
external network adapter or ENA).
• Make sure the cable connecting the ENA
and the printer is securely attached. Turn
the printer off and then on to reset the
printer.
•Press Go to clear the message. The
printer erases any reference to the ENA
and then resets.
54 Par <x> ENA
Connection Lost
55 Unsupported
Option in Slot <x>
An unsupported option card is installed
in one of the ports or an unsupported
flash DIMM is installed in a memory
slot.
Turn off and unplug the printer. Remove the
unsupported option. Plug in the printer and
turn it on.
See Removing memory and option
cards for help.
55 Unsupported Flash
in Slot <x>
Message What this message means What you can do