Filter
Top Products
89
63 Unformatted Disk
The printer detects an unformatted
hard disk.
•Press Go to clear the message and
continue printing.
• Format the disk before performing any
disk operations. To format the disk,
select Format Disk from the Utilities
Menu.
• If the error message remains, the hard
disk may be defective and require
replacing. Install a new hard disk and
format it.
See also: Format Disk
64 Disk Not Supported
The printer detects that an
incompatible hard disk is installed.
Turn the printer off and remove the disk.
See also: Removing memory and option
cards
64 Unsupported Disk
Format
The printer detects an unsupported
disk format.
•Press Go to clear the message.
• Format the disk.
Note: Disk operations are not allowed
until the disk is formatted.
80 Fuser Maintenance
The counter that tracks wear on the
fuser has reached its limit.
•Press Go to continue printing.
• If print quality is unacceptable, replace
the fuser.
See also: Replacing the fuser
81 Engine Code CRC
Failure
Microcode in the engine flash code
module has failed a system check.
•Press Go to clear the message.
• Discard the code. Retransmit the
microcode data from the host computer.
82 Waste Bottle Nearly
Full
The toner waste container is almost
full.
•Press Go to clear the message and
continue printing.
• Replace the toner waste container.
See also: 82 Waste Toner Bottle Full;
Replacing the toner waste container
82 Waste Toner Bottle
Full
The toner waste container is full. Replace the toner waste container and
press Go to clear the message.
See also: Replacing the toner waste
container
82 Waste Toner Bottle
Missing
The toner waste container is missing. Replace the toner waste container and
press Go to clear the message.
See also: Replacing the toner waste
container
83 ITU Maintenance
The counter that tracks wear on the
image transfer unit has reached its
limit.
•Press Go to continue printing.
• If print quality is unacceptable, replace
the image transfer unit.
See also: Replacing the image transfer
unit and transfer roller
84 Oiler Nearly
Exhausted
The web oiler is nearing the end of its
life.
•Press Go to clear the message and
continue printing.
• Replace the web oiler.
See also: 84 Replace Oiler
84 Replace Oiler
The web oiler has reached its end of
life or is missing from the printer.
Replace the web oiler.
See also: 84 Oiler Nearly Exhausted
Message What this message means What you can do