Filter
Top Products
70
Print Area
To modify the logical and physical
printable area.
Normal* Note: The Whole Page setting only
affects pages printed using PCL 5
interpreter. This setting has no effect
on pages printed using the PCL XL or
PostScript interpreters. If you try to
print any data in the non-printable area
defined by Normal Print Area, the
printer will clip the image at the
boundary defined by the Normal
defined printable area.
Fit to Page
Whole Page
Print
Timeout
To specify the amount of time (in
seconds) the printer waits before
printing the last page of a print job that
does not end with a command to print
the page. The print timeout counter
does not start until Waiting is
displayed.
Disabled The printer does not print the last page
of a print job until one of the following
occurs:
• The printer receives enough
information to fill the page.
• The printer receives a Form Feed
command.
• You select Print Buffer from the Job
Menu.
1...255 (90*) The printer prints the last page after
the specified time. (Your printer may
not support the entire range of values.)
Printer
Language
To establish the default printer
language used to communicate data
from the computer to the printer.
Note: Setting a printer language as
the default does not prevent a software
application from sending print jobs that
use the other language.
PCL Emulation PCL emulation, compatible with
Hewlett-Packard printers.
PS Emulation* PostScript emulation, compatible with
Adobe PostScript language.
Printer
Usage
To determine the behavior of the
image transfer unit during printing.
Max Speed The image transfer unit is engaged
throughout the print job.
Max Yield* The image transfer unit position is
engaged based on page content. This
may extend the life of certain print
supplies.
Resource
Save
To determine what the printer does
with downloaded resources, such as
fonts and macros stored in RAM, if the
printer receives a job that requires
more memory than is available.
Off* Printer retains downloaded resources
only until memory is needed. It then
deletes those resources associated
with the inactive printer language.
On Printer retains all downloaded
resources for all printer languages
during language changes and printer
resets. If the printer runs out of
memory, 38 Memory Full is
displayed.
Menu Item Purpose Values