Filter
Top Products
Updating System Software 83
Updating System Software
The system software in your magicolor 2200 DeskLaser is stored in flash ROM, read-only
memory that can be erased and rewritten to “in a flash.” This allows you to update the
system software through the printer interface without opening up the printer and installing
new PROMs. The system software is updated by sending a specified file to the printer.
Downloading Methods
You can use Ethernet TCP/IP or a parallel connection to download the system file to the
printer.
System File
To perform an update you need to download a system file to your printer. The system file
filename identifies the system version number and ends with an
.img
filename extension.
The printer must remain inactive during the download process.
This item needs
cleaning...
After... See...
Duplex unit paper guides
or rollers
Every 30,000 single-sided pages, or 12
months, whichever comes earlier.
Maintenance Guide.
Laser lens cover Removing the waste toner pack to clean
around it or to replace it.
Paper exit rollers Every 30,000 single-sided pages, or 12
months, whichever comes earlier.
Printer exterior As needed.
Printer interior Every 30,000 single-sided pages, or 12
months, whichever comes earlier.
Download Method See
Ethernet TCP/IP “Downloading the System File via Ethernet (TCP/IP)” on page 84.
Parallel “Downloading the System File via Parallel” on page 87.