Mitsubishi Electronics SH-080007 Network Card User Manual


 
2 - 2 2 - 2
MELSEC-Q
2 SYSTEM CONFIGURATION AND AVAILABLE FUNCTIONS
2
(4) Applicable software packages
(a) Software/setting & monitor tools ( 1) for the PLC
The following table lists the systems and software packages applicable for
the Q series C24.
When using the Q series C24, GX Developer is required.
Software packages
GX Developer GX Configurator-SC
Single CPU system Version 7 or later
Q00J/Q00/Q001CPU
Multiple CPU system Version 8 or later
Version 1.0 or later
(Versions prior to SW0D5C-
QSCU-E 40E are not usable.)
Single CPU system Version 4 or later SW0D5C-QSCU-E 00A or later
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Multiple CPU system Version 6 or later SW0D5C-QSCU-E 20C or later
Single CPU system
Q12PH/Q25PHCPU
Multiple CPU system
Version 7.10L or later
Version 1.13P or later
(Versions prior to SW0D5C-
QSCU-E 40E are not usable.)
When installing an MELSECNET/H remote I/O
station
Version 6 or later SW0D5C-QSCU-E 30D or later
1 See section 2.6 for the versions of the GX Developer and GX Configurator-SC that support the
functions added through improvements in the Q series C24.
(b) Communication support tools for external devices
Item Name Model Remark
MX Component SWnD5C-ACT -E
ActiveX control library.
The "n" in the model name is 0 or greater. (
1
)
1 Depending on the version of MX Component used, different versions of Q series C24 are
supported.
See the manual of MX Component for the details.