Filter
Top Products
About This Manual
©
National Instruments Corporation xi PCI-4451/4452 User Manual
National Instruments Documentation
The PCI-4451/4452 User Manual is one piece of the documentation set
for your DAQ system. You could have any of several types of manuals
depending on the hardware and software in your system. Use the manuals
you have as follows:
• Software documentation—You may have both application software
and NI-DAQ software documentation. National Instruments
application software includes ComponentWorks, LabVIEW,
LabWindows/CVI, Measure, and VirtualBench. After you set up your
hardware system, use either your application software documentation
or the NI-DAQ documentation to help you write your application. If
you have a large, complicated system, it is worthwhile to look through
the software documentation before you configure your hardware.
• Accessory installation guides or manuals—If you are using accessory
products, read the terminal block and cable assembly installation
guides. They explain how to physically connect the relevant pieces
of the system. Consult these guides when you are making your
connections.
Related Documentation
The following documents contain information you may find helpful:
• BNC-2140 User Manual
• National Instruments Application Note 025, Field Wiring and Noise
Considerations for Analog Signals
• PCI Local Bus Specification Revision 2.0
Customer Communication
National Instruments wants to receive your comments on our products
and manuals. We are interested in the applications you develop with our
products, and we want to help if you have problems with them. To make it
easy for you to contact us, this manual contains comment and configuration
forms for you to complete. These forms are in Appendix C, Customer
Communication, at the end of this manual.
User.book Page xi Tuesday, April 14, 1998 10:20 AM