National Instruments PCI-4451 Switch User Manual


 
Index
PCI-4451/4452 User Manual I-4
©
National Instruments Corporation
related documentation, xi
dynamic characteristic specifications
analog input, A-4 to A-5
analog output, A-7
E
e-mail support, C-2
EEPROM storage of calibration constants, 5-1
electronic support services, C-1 to C-2
environment specifications, A-10
environmental noise, avoiding, 4-24 to 4-25,
6-9
equipment, optional, 1-4
EXTSTROBE* signal
digital I/O pin assignments (table), 4-6
digital I/O signal summary (table), 4-8
timing connections, 4-18
F
fax and telephone support numbers, C-2
Fax-on-Demand support, C-2
field wiring considerations, 4-24 to 4-25
floating signal sources, 4-10
FREQ_OUT signal
digital I/O pin assignments (table), 4-7
digital I/O signal summary (table), 4-8
general-purpose timing connections, 4-24
FTP support, C-1
fuse, self-resetting
analog power connections, 4-12
digital power connections, 4-14
G
general-purpose timing signal connections,
4-19 to 4-24
FREQ_OUT signal, 4-24
GPCTR0_GATE signal, 4-20
GPCTR0_OUT signal, 4-20
GPCTR0_SOURCE signal, 4-19
GPCTR0_UP_DOWN signal, 4-20
GPCTR1_GATE signal, 4-21 to 4-22
GPCTR1_OUT signal, 4-22
GPCTR1_SOURCE signal, 4-21
GPCTR1_UP_DOWN signal,
4-22 to 4-24
GPCTR0_GATE signal, 4-20
GPCTR0_OUT signal
digital I/O pin assignments (table), 4-7
digital I/O signal summary (table), 4-8
general-purpose timing connections, 4-20
GPCTR0_SOURCE signal, 4-19
GPCTR0_UP_DOWN signal, 4-20
GPCTR1_GATE signal, 4-21 to 4-22
GPCTR1_OUT signal
digital I/O pin assignments (table), 4-7
digital I/O signal summary (table), 4-8
general-purpose timing connections, 4-22
GPCTR1_SOURCE signal, 4-21
GPCTR1_UP_DOWN signal, 4-22 to 4-24
ground-referenced signal sources, 4-10
H
hardware installation, 2-1 to 2-2
hardware overview
analog input, 3-3 to 3-5
input mode, 3-3
input polarity and range, 3-3 to 3-4
input range selection considerations,
3-4 to 3-5
analog output, 3-5 to 3-6
analog trigger, 3-6 to 3-9
block diagrams
analog function, 3-2
digital function, 3-1
digital I/O, 3-10
timing signal routing, 3-11 to 3-12
device and RTSI clocks, 3-11 to 3-12
programmable function inputs, 3-11
User.book Page 4 Tuesday, April 14, 1998 10:20 AM