Filter
Top Products
3-4 Installation
Inventory
Before beginning installation, make sure you have received all of the
required modules to install the 5992.
•
NCR 5592 unit and stylus
•
Communication Cable (specific to you connectivity requirements)
•
Power Supply (optional)
•
Remote Connector Block (RCB) (optional)
•
Installation and Operating Guide
Installation
The following sections describe the steps needed to successfully install
your NCR 5992. A specific installation sheet may be included in the
documentation if your connectivity requirement is not one of the
installations included in this manual.
A power supply may have been ordered with the NCR 5992. This only
needs to be connected if the host device (PC or cash register) does not
supply power.
You may also need to connect a power supply if there is not sufficient
power for additional devices you may install (such as a check reader,
scan gun, etc.).